Product | Description | Application/End Use | Coverage | Pack Size |
Xypex Modified | Chemical treatment for the waterproofing, protection and repair of concrete. | It can be applied as a second coat to reinforce Xypex Concentrate, or applied by itself to damp-proof the exterior of foundation walls. Applied as a second coat, Xypex Modified chemically reinforces Xypex Concentrate where two coats are required and produces a harder finish. |
6 – 7.2 sq. ft. per lb. (1.25 – 1.5 lb. per sq. yd. or 0.65 – 0.8 kg/m2 ). |
60 lb. (27.2 kg) pails and 50 lb. (22.7 kg) bags. |
Xypex Patch’n Plug | Fastsetting, hydraulic cement compound for concrete patching and repair. | Patch’n Plug stops flowing water in seconds and is used to seal cracks, tie holes, and other defects in concrete. The sealing performance characteristics of Patch’n Plug are enhanced by Xypex’s unique crystalline waterproofing technology. | 60 lb. (27.2 kg) pail of Xypex Patch’n Plug will produce 0.54 cubic feet (0.0154 cu. metres) of mortar. |
20 lb. (9.1 kg) pails and 60 lb. (27.2 kg) pails |
Xypex Concentrate | Chemical treatment for the waterproofing, protection and repair of concrete. |
It is applied as a cementitious slurry to the pre-saturated surface of existing above and below grade structures. The active chemicals diffuse into the substrate and react with moisture and the constituents of hardened concrete to cause a catalytic reaction. | 6 to 7.2 sq. ft./lb. (1.25 – 1.5 lb./sq. yd. or 0.65 – 0.8 kg/m2 ). |
9.1 kg pails, 27.2 kg pails and 22.7 kg bags |
MoyaProof CWL | Crystallization liquid waterproofing system | It can be used for various applications in concrete structures including marine and coastal structures, rafts, precast panels, water storage tanks, highways, runways, roofs, decks, bridges, cut & cover tunnels, silos, car parks, swimming pools, pipes, lift pits, etc. | 4-6 m2/ltr/coat | 20 & 200 ltr |
MoyaProof CWP | Crystallization slurry Cementitious waterproofing system | Can be used for various concrete elements in structures such as marine and coastal structures, rafts, precast panels, water storage tanks, highways, runways, roofs, decks, bridges, cut and cover tunnels, silos, car park, swimming pools, pipes, lift pits, etc. |
Dry shake: 4-5 kg/m2 Slurry: 11m2/bag at 2 mm |
25 kg bag |
MoyaProof Plug | Rapid setting water plug | To stop pressure and seepage leaks through joints / cracks in concrete, rocks, culverts, basements, tunnels, dams, pools, subways, etc. | N/A | 10 & 25 kg bags |
MoyaProof GP | General purpose economical waterproof-ing system | Can be used as a waterproofing system in various applications such as, wet areas, bathrooms, balconies, gardens, planters, kitchens, lift pits, water tanks, concrete surface behind cladding, etc. Can also be used as a backing coat for marble, stone and other mineral based cladding to protect against rising moisture. | 7.80 m2/bag at 2 mm | 25 kg bag |
MoyaProof WS2 | Polymer modified semi flexible cementi-tious waterproofing system | Suitable for waterproofing of swimming pools, balconies, bathrooms, wet areas, basements, roof waterproofing system in damp conditions where other systems cannot be used, lift pits, etc. Can also be used as a backing coat for marble, stone and other mineral based cladding to protect against rising moisture. | 6.30 m2/set at 2 mm | 25 kg set |
MoyaProof HF | Polymer modified highly flexible cementi-tious waterproofing liquid applied membrane | Used as liquid applied waterproofing membrane for marine structures, basement, bathrooms, wet areas, swimming pools, roof waterproofing, water tanks, etc. | 0.5 m2/ltr at 2 mm | 6 ltr set |
MoyaSwell Stop | Hydrophilic swelling joint water stop | Used to stop water ingress through both vertical and horizontal non moving construction joints and around pipe penetrations through concrete in areas viz: bathrooms, washrooms, water tank joints, basements, pits, underground safety tanks, etc. | Refer Data Sheet | 5 mtr roll |
MoyaShield SR | Silane siloxane based water repellent | Used as a clear coat to protect concrete surfaces, stone cladding, coloured plasters, parking decks, bridges, tiles, tile grouts, decorative renders, etc. | 4-6m2/ltr/coat | 20 & 200 ltr |
MoyaShield WR | Water dispersed silane siloxane based impregnating water repellent | Used as a clear coat to protect concrete surfaces, stone cladding, coloured plasters, parking decks, bridges, decorative renders, tiles, tile grouts, etc. | 4-6 m2/ltr/coat | 20 & 200 ltr |
MoyaShield ACC | Pure aliphatic acrylate based anti carbonation protective coating | It is designed to provide protection for atmospherically exposed, reinforced concrete structures against attack from moisture ingress, acidic gases, sulphates, carbonations and chloride ions for buildings, villas, marine structures, concrete cladding, precast units, bridges, domes, car park walls and ceilings, boundary walls, stairs, cement silos, etc. | 4-4.5m2/ltr/coat at 200 microns wft (90 microns dft) | 20 ltr pail |
MoyaShield Uflex | High performance environment friendly pure acrylic anti carbonation protective coating | Used to protect and waterproof roofs, exterior and interior walls, plasters, renders, etc. It is used as an UV resistant and anti-carbonation coating for car parks, bridges, tunnels and structures exposed to aggressive elements. | 2.5 m2/ltr/coat at 400 microns wft (200 microns dft) | 20 ltr pail |
MoyaShield Uflex HR | Heat reflective pure acrylic elastomeric coating | Can be used on various substrates like concrete, metals, timber, asbestos boards, cement, brickwork, etc. for roofs, silos, storage tanks, external walls, etc. | 3 m2/ltr/coat at 300 microns wft (150 microns dft) | 20 ltr pail |
Uflex Primer No.1 | Primer for elastomeric coatings | It is used as a primer cum sealer coat over concrete, walls and plastered for interior and exterior applications. | 7-8m2/ltr/coat | 20 ltr pail |
Uflex Primer No.2 | Solvent based primer for elastomeric coatings | It is used as a primer cum sealer coat over concrete, brick walls, plastered surfaces, PVC surfaces, steel, galvanized steel, aluminum, timber work in interior and exterior applications. | 5-8m2/ltr/coat | 20 ltr pail |
MoyaShield BE | Water based bitumen emulsion protective coating | It is used as a damp proofing, protective coating for rafts, underground structures, civil structures, precast panels, pipes, etc. | 2.5m2/ltr/coat at 400 microns wft (200 microns dft) | 20 & 200 ltr |
MoyaShield RBE | Rubber modified bitumen emulsion | It is used as a damp proofing, protective coating for rafts, underground structures, civil structures, precast panels, pipes, etc. | 2m2/ltr/coat at 500 microns wft (300 microns dft) | 20 & 200 ltr |
MoyaShield SBB | Solvent based bitumen coating | It is used as a protective coating on concrete, masonry, metal, etc., as a priming coat prior to any bitumen coating or modified bitumen membrane. It can also be used as a damp proofing and waterproofing coating for below or above ground concrete surfaces. |
7-10m2/ltr/coat at 100 microns wft (50 microns dft) |
20 & 200 ltr |
MoyaShield PU | Polyurethane based waterproofing membrane | Used as a protective and waterproofing coating for bathrooms, wet areas, planters, car park decks, foundation walls, metal, wood or concrete roofs and surfaces subjected to thermal movements. Suitable for maintenance and repair of existing bituminous waterproof- ing membranes. | 1 m2/ltr/coat at 1000 microns wft | 20 kg pail |
Xypex Patch ‘n Plug | Fast setting, hydraulic cement compound | It is a specially designed, fastsetting, hydraulic cement compound for concrete patching and repair. Patch’n Plug stops flowing water in seconds and is used to seal cracks, tie holes, and other defects in concrete. | 27.2 kg pail will produce 0.54 cubic feet 0.0154 cu. metres of mortar |
9.1 kg pails & 27.2 kg pails |