Product
|
Description
|
Application / End Use
|
Yield
|
Dosage
|
Pack Size
|
NanoGrout A |
Plasticising and expanding additive for mortars, grouts and concrete |
Grout additive for pre-stressed cable ducts, bearing plates, tunnel linings, sheet pile anchors, rock & soil anchoring, concrete crack injection, etc. |
N / A |
For Grout: 0.25 – 0.5 % by weight of cement. For concrete: 0.5 -1.0 % by weight of cement |
1, 5 & 20 kg bags |
NanoGrout Aid |
Plasticising and expanding additive for mortars, grouts and concrete |
Grout additive for pre-stressed cable ducts, bearing plates, tunnel linings, sheet pile anchors, rock & soil anchoring, concrete crack injection, non-shrink concrete, etc. |
N / A |
5 – 10 % by weight of cement |
1, 5 & 20 kg bags |
NanoGrout CFG |
Pre mixed, ready to use, highly fluid, non-shrink, cementitious grout |
Grouting of post-tensioned cable ducts, sonic tubes in the concrete piles, injection grouting, rock and sheet pile anchors, etc. |
17 ltr / bag |
N / A |
25 & 50 kg bags |
NanoGrout VF |
Non-shrink cementitous void filling grout |
Grouting of bolt pockets, bridge bearings, machinery base plates, stanchion base plates, precast panel joints, voids in block masonry, creating stiffener joint in masonry partition walls, filling of tie holes, concrete void filling by placing within the formwork, etc. |
13 ltr / bag |
N / A |
25 kg bag |
NanoGrout GP |
General purpose, non-shrink, cementi-tious grout |
Grouting of bolt pockets, base plate, bridge bearings, machinery base plates, stanchion base plates, joints between precast panels, rail and anchor bolts, concrete void filling by placing within the formwork, etc. |
13 ltr / bag |
N / A |
25 kg bag |
NanoGrout PG |
Shrinkage compensated, free flow cementitious, precision grout |
Grouting of large, heavy machinery base-plates, crane rails, stanchion base plates, bridge bearings, bolt pockets and areas requiring precision grouting, concrete void filling by placing within the formwork, etc. |
13 ltr / bag |
N / A |
25 kg bag |
NanoGrout HES |
High early & ultimate strength, free flow, non-shrink cementitious grout |
Grouting of bridge bearings, machinery base plates, crane rails, stanchion base plates, bolt pockets, concrete void filling by placing within the formwork, etc. |
12 ltr / bag |
N / A |
25 kg bag |
NanoGrout MG |
Non-Shrink, free flow, cementitious, precision grout for deep pour applications |
Grouting of machine base plates, stanchion base plates, precast concrete panel joints, pipeline flanges, pipe’s surrounding in concrete and brick walls, etc. |
13 ltr / bag |
N / A |
25 kg bag |
NanoGrout NG |
Non Metallic Non-Shrink Cementitious Grout |
Grouting of bolt pockets, gaps between the base plate and concrete such as small equipment base plates, structural column base plates, rail and anchor bolts, etc. Can be used for filling precast panel joints, tie holes with adjustable consistency. Can be used for reinstating damaged structural elements by placing within the formwork. |
13 ltr / bag |
N / A |
25 kg bag |
NanoGrout RES |
Rapid early strength free flow cementi- tous grout |
It is used for grouting where quick installation is required to facilitate loading within few hours, viz: grouting of crane rails, anchor bolts, stanchion base pates, bridge bearings, etc. Also used for fast repairing of pot holes on the roads, runways and other concrete structures, etc. |
12 ltr / bag |
N / A |
25 kg bag |
NanoGrout SG |
Epoxy based structural adhesive & anchor grout |
Grouting for bolt pockets, bar anchor, starter bars, boom fixing, etc. Patch repairs to concrete structures, adhesive for precast components, bridge bearings, steel plates and other structural repair works. |
N / A |
Depends on diameter of hole, bar and depth |
3 & 6 ltr set |
NanoGrout EG |
High strength, chemical resistant, epoxy resin grout |
Grouting heavy machinery base plates, compressors, generators, turbines, crane rails, centrifugal pumps, bolt pockets, bridge bearing stanchion base plates, pile head reprofiling and areas where rotary / dynamic movements are encountered. |
N / A |
N / A |
10 & 20 ltr set |
NanoGrout EGLE |
Low exhotherm, chemical resistant, epoxy resin grout |
Grouting of heavy machinery base plates, compressors, generators, turbines, centrifugal pumps, bolt pockets, crane rails, bridge bearing, stanchion base plates, reprofiling, waterproofing of pile head and areas where rotary / dynamic movements are encountered. |
N / A |
N / A |
10 & 20 ltr set |