| Product | Description | Application / End Use | Pack Size |
| Conmix Tile Adhesive – CTA | CTA is a cement based water resistant tile adhesive with fast setting, quick strength and self curing properties. It contains special chemicals including re-dispersible polymers and can be used for fixing ceramic tiles on floor and wall surfaces. | Conmix CTA is applied in one coat, having a thickness of 3-5 mm. To achieve an uniform thickness the mortar is leveled with a serrated trowel. | 40 kg bags |
| Thick Bed Motar – THBM | THBM is a dry premix cement based thick bed tile adhesive for fixing heavy tiles or pre-cast stones on floors and skirting. THBM is available in grey and white colours and is suitable for both internal and external application. |
Conmix THBM is applied in one coat, up to a thickness between 5-20 mm. Do not spread large areas at a time as it may result in the mortar drying out before the tiles can be laid and pressed leading to poor adhesion. Once the mortar has been applied, the working time will vary according to the porosity of the substrate and ambient conditions. Ensure that the tiles are properly embedded in the fresh mortar. | 50 kg bags |
| Tile Joint Filler – TJF | TJF is a dry pre mix, water resistant cement based tile joint filler for internal and external use, available in a variety of colours, in Grade ‘A’ joints upto 5mm and in Grade ‘B’ joints from 5-12 mm, for wall and floor tiling. | Conmix TJF is to be applied within the tile joints using a rubber spatula, taking care to ensure that the grout is well compacted into the joints. | 25 Kg bags |
| Universal Tile Glue – UTG | UTG is a dry pre mix, water resistant, cement-based adhesive for thin-bed fixing of ceramic tiles on walls and floors. Long open time and excellent workability ensure the fixing of even heavy tiles. Available in grey and white colour. | UTG is applied in one coat, having a thickness of 3-5 mm. To achieve a uniform thickness the mortar is levelled with a serrated trowel. The thickness of the ribs will depend on the size and type of the tile. | 25 kg bags |
| Water Resistant Tile Adhesive – c500 | C500 is a cement based water resistant tile adhesive with fast setting, quick strength and self curing properties. It contains special chemicals including re-dispersible polymers. It is suitable for fixing wall and floor tiles. |
C500 is rendered in one coat, having a thickness of 3-5 mm. To achieve a uniform thickness, the mortar is leveled with a serrated trowel. |
25 kg bags |
| Water Resistant Tile Motar – c800 | C800 is a dry pre mix, water resistant, cement based thin bed adhesive for the fixing granite, vitrified tiles, glass mosaic, glass bricks, ceramic wall and floor tiles. |
Conmix C800 is rendered in one coat, having a thickness of 3-5 mm. To achieve an uniform thickness, the mortar is leveled with a serratedtrowel. The thickness of the ribs will depend on the size and type of tile. | 25 kg bags |
