|Product||Description||Application / End Use||Pack Size|
|Block-Laying-Mortar-CM4||CM4 is a dry pre mix, sand cement mortar for laying masonry bricks or blocks.||CM4 can be applied over the blocks for building up the walls and to fill the joints with required thickness by means of a trowel and levelled. Allow it to set for approximately 30 minutes prior to removal of excessive material.||50 kg bags|
|Conmix-Conputty||Conmix Conputty is a dry pre mix, smooth finish, leveling compound for internal and external use.||Conputty mixed as above is applied onto the prepared background using a painter’s spatula. Do not use a masons trowel.||5 kg or 20 kg|
|Conmix-Floor-Screed-SC200 & SC200/10||Conmix Floor Screed is a dry pre mix, ready to use screed, ideal for use to level substrates prior to laying carpets, floor tiles etc.||Floor Screed SC supplied in 50 kg bags must be mixed with potable water only, in a clean plastic bucket or a clean, non-corrosive, uncontaminated metal tub. To ensure a homogenous and uniform mix, a mechanical mixer must be used.||50 kg bags|
|Dressing-Plaster-LC13||LC13 is a dry pre mix, cement lime plaster for internal or external application. Used as a finishing coat on concrete, block work
or rendered surfaces.
|LC13 mixed as above can be applied to the prepared backgrounds upto a thickness of 20 mm. LC13 should be applied to the background
with a trowel and leveled.
|50 kg bags|
|Dry-Pre-Mix-Concrete-DPMC||DPMC is a dry pre mix concrete.||All types of concrete applications.||50 kg & 1000kg bags|
|Fitting-Plaster-FPC||FPC is a dry pre mix, cement based mortar for fixing plaster stops, corner beads, recessed cables, fibre glass netting etc. It is for both internal and external use.||After mixing, the mortar has a stiff consistency and should be used within 10 minutes.
FPC can be used internally and externally.
|50 Kg bag|
|Skim-Coat-Plaster-LC11||LC11 is a pre mix, fine sand cement mortar for internal and external use.||LC11 mixed as above can be applied to the prepared backgrounds in one coat thickness of 3-8 mm. LC11 should be applied to the background with a trowel and levelled.||25 kg bags|
|Light-Weight-Block-Mortar-LWBM||LWBM is a dry pre mix, thin bed mortar specially designed for fixing Autoclaved Aerated Concrete blocks and Calcium Silicate blocks.||
LWBM is a dry pre mix, thin bed mortar specially designed for fixing Autoclaved Aerated Concrete blocks and Calcium Silicate blocks.
|50 kg bags|