Product | Description | Application / End Use | Pack Size |
Conmix-Gypglue | It is gypsum based general purpose adhesive with high bond strength and good initial grab. | Gypglue mixed as above has to be applied over the prepared background at a maximum thickness of 3 mm and the cornice has to be fixedimmediately. Avoid spreading over large areas as it could lead to poor adhesion. | 20 Kg bags |
Gypsum Lime Plaster GLP1A | It is a dry pre mix, gypsum lime plaster. | Mixed GLP1A can be applied in a single coat onto the prepared background up to a thickness of 10 – 20 mm. The surface can be brought to a very smooth finish by employing a finishing technique consisting of levelling, scraping, sponging, troweling and polishing the appliedGLP1A. | 40 Kg bags |
Gypsum Lime Veneer Plaster GLVP | It GLVP is a dry pre mix, single coat internal plaster for veneer fair faced finish | Mixed GLVP can be applied in a single coat on to the prepared background to a thickness of 3 – 6 mm. The surface should be closed tightlywith a steel trowel then sponged and finished off with a damp steel trowel to achieve a smooth veneer finish. Excessive water in the spongeshould be avoided. | 25 kg bags |
Gypsum Lime Plaster Light | GLP LGT is a dry pre mix, gypsum based, light weight plaster for internal use. | Mixed GLP LGT can be applied in a single coat on to the prepared background to a thickness of 5-15 mm. The surface should be closed tightly with a steel trowel, then sponged and finished off with a damp steel trowel to achieve a smooth finish. Excessive water in the sponge should be avoided. | 25 kg bags |