| Product |
Description |
Application / End Use |
Coverage |
Pack Size |
| ResiGard Acrylic |
Single component acrylic floor sealer & dust proofer |
Used as a sealer coat on concrete surfaces to provide a dustproof and impermeable surface in warehouses, car parks, light industrial floors, etc. It can also be used as a backing coat for marble and other mineral based cladding to protect against rising moisture. |
5 – 7 m2/ ltr/coat |
20 & 200 ltr |
| ResiGard Sealer |
Single component water dispersed acrylic sealer |
Used as sealer coat over natural stone, marble, granite, pavers, masonry surface, etc. It can be applied over textured plaster as a sealer coat to prevent efflorescence. Used as a backing coat for marble and other mineral based cladding to protect against rising moisture. |
5 – 7 m2/ ltr/coat |
5 & 20 ltr |
| ResiGard NT |
Non-toxic epoxy resin coating |
Can be applied to steel and concrete internal tank surfaces to provide corrosion resistance used for waterproofing for tanks and reservoirs containing water intended for human consumption, silos, wastewater treatment plants, breweries, canning and bottling units, food processing plants, etc. |
5 m2 / ltr / coat at 200 microns wft for floor 8 m2 / ltr / coat at 125 microns wft for wall |
4 ltr set |
| ResiGard EC |
High performance, chemical resistant epoxy coating |
It is suitable for use in workshops, car parks, dairies, kitchens, showrooms, light to medium duty industrial floor coatings, sealer coat over epoxy screed, etc. |
10 m2 /ltr/coat at 100 microns wft ( 50 microns dft) |
5 & 10 ltr set |
| ResiGard EC-S |
Superior epoxy resin coating for steel and concrete |
Used as a coating on floors and walls in warehouses, laboratories, battery & pump rooms, car parks, petrochemi- cal facilities, bridges, off-shore structures, power industry, pulp & paper mills, sealer coat over epoxy screed, etc. |
7 m2/ltr/coat at 130 microns wft (75 microns dft) for floor 11 m2 /ltr /coat at 86 microns wft (50 microns dft) for wall |
5 ltr set |
| ResiGard HP |
High build high performance solvent free epoxy coating |
Suitable for use in light to medium duty manufacturing areas, car parks & mechanical workshops. Can be used in food and chemical industry, hospitals, warehouse, schools, kitchens, high traffic applications, etc. with or without anti slip grains, sealer coat over epoxy screed, etc. |
5 m2/ ltr/coat at 200 microns wft |
7.5 & 20 ltr set |
| ResiGard SL2 |
1-3 mm thick self-smoothening high performance chemical resistant epoxy flooring |
As a floor topping, ideal for use in food and chemical industry, hospitals, schools, kitchens, laboratories, pharma- ceutical industry, high traffic applications, etc. |
0.5 m2/ltr at 2 mm |
7.5 & 20 ltr set |
| ResiGard SL4 |
3-6 mm thick self-smoothening chemical resistant high performance epoxy flooring system |
It is suitable for various floor applications in light, medium and heavy industries like food and chemical industry, hospitals, schools, kitchens, laboratories, pharmaceutical industry, high traffic applications, etc. |
0.25m2 /ltr at 4 mm |
7.5 & 20 ltr set |
| ResiGard RS5 |
Self-smoothening, Epoxy Underlay |
It is used as underlayment on floors in pharmaceutical plants, laboratories, mechanical industry, workshops, dairies, kitchens, showrooms, petrochemical plants, paper mills, etc. |
0.2 m2/ltr at 5 mm |
10 &15 ltr set |
| ResiGard RS10 |
Epoxy Self-smoothening Floor Levelling Compound |
Can be used as underlayment on floors in pharmaceutical plants, laboratories, heavy mechanical industry, workshops, dairies, kitchens, showrooms, petrochemical plants, paper mills, etc. before application of epoxy and PU coatings. Pigmented version can be used as final surface without any topping. |
2m2 /set of 20 ltr at 10 mm |
10 & 20 ltr set |
| ResiGard ES |
Heavy duty abrasion and chemical resistant epoxy floor screed |
It can be used for industrial floorings, warehouses, workshops, ramps, garages, airport maintenance areas, metal processing & engineering units and areas subjected to heavy traffic. It can also be used as a coving or patch repair product |
0.2 m2 /ltr at 5 mm |
10 ltr set |
| ResiGard EC WB |
Water Dispersed Epoxy Coating |
Used as protective coating on floors, walls ceilings of kitchens, laboratories, potable water tanks, swimming pools pharmaceutical plants, hospitals, hotels, food processing areas, etc. It can be used over damp concrete surfaces where normal resinous coatings can not be applied. |
4 to 5 m2 /ltr/coat at 200 microns wft |
5 & 10 Itr Set |
| ResiGard ES WB |
Water Miscible Epoxy Floor Screed |
Used as floor screed for cold storage, dairies, freezer rooms, food processing areas, industrial floors, kitchens, pharma- ceutical plants, laboratories, textile plants, paper and pulp industry, warehouses, garages, etc. |
2 m2 /10ltr/coat at 5 mm |
10 Itr set |
| ResiGard NC |
Chemical Resistant Coating |
Can be applied to steel and concrete surface to provide highest level of chemical resistance in areas like battery rooms, paper mills, waste water treatment plants, food processing units, desalination plants, chemical laboratories, breweries, petrochemical plants, etc. It can be used as industrial floor coating with medium load traffic like workshops, garages, showrooms, etc. |
4m2 /ltr/coat at 250 microns wft. |
4 ltr set |
| ResiGard Primer SB |
High penetrating epoxy based primer and sealer |
Used as a priming coat on cementitious and steel surfaces prior to application of ResiGard range of coatings. Typical areas of application include car parks, factory floors, warehouses, etc. |
7.5 – 9m2/ltr/ coat |
6 & 15 ltr set |
| ResiGard Primer SF |
Solvent free epoxy based primer and coating system |
Used as a priming coat on cementitious, wood and steel surfaces prior to application of ResiGard range of coatings. Typical areas of application include car parks, factory floors, food industry, kitchens, aircraft hangers, hospitals, pharma- ceutical plants, warehouses etc. It can also be use as a clear coat to maintain original colour and appearance substrate which are not exposed to UV rays. |
6 – 7 m2/ltr/coat |
6 & 15 ltr set |
| ResiGard MB |
Moisture barrier epoxy coating |
Used as moisture barrier coating and primer before application of epoxy and polyurethane coatings in places like basements, car parks, warehouses, swimming pools, water tanks, etc. It can be used as sealer coat for green concrete, walls, floors, etc. It can also be used as an anti-corrosive coating for steel surface. |
7m2/ltr/coat |
5 ltr set |
| ResiGard ET |
Epoxy tar protective coating for steel and concrete |
Used on structures in aggressive environment such as sewerage works, drainage, foundation concrete, chemical treatment plants, food treatment plants, breweries, effluent treatment plants, marine structures etc. It can also be used as a damp proof coating for underground structures. |
6m2 /ltr/coat at 200 microns wft (100 microns dft) |
5 ltr set |
| ResiGard ET SF |
Solvent Free Epoxy Tar Protective Coating |
Used as protective coating against corrosion of structures in aggressive environments such as sewerage works, foundations, retaining walls, drainage, chemical treatment plants, food treatment plants, effluent treatment plants, man hole lining, marine structures like jetties, piers, sea water tanks, etc. It can also be used as curing compound over green concrete. |
5m2/ltr/coat at 200 microns dft. |
5 & 10 ltr set |
| ResiGard PU |
UV resistant polyurethane coating for steel and concrete |
Can be applied on variety of surfaces including concrete, steel and fully cured epoxies. It is recommended in areas requiring chemical resistance, protection against UV rays, areas exposed to aggressive environment such as marine structures, pharmaceutical units, car park decks, battery rooms, textile industry, manufacturing units, etc. |
Clear : 10 m2/ltr/ coat at 100 microns wft (50 microns dft) Pigmented : 5 m2/ltr/coat at 180 microns wft (100 microns dft) |
6 & 20 ltr set |
| ResiGard PU CP |
Solvent free polyurethane flooring system |
Used as floor and wall coating system in areas such as multi-level car parks, laboratories, warehouse, food process- ing units, dairies, pharmaceutical plants, laboratory, etc. Anti-slip surfaces can be obtained by incorporating anti-slip grains. In conjunction with ResiGard PU, it can be used on exposed floor surfaces. |
5m2 /ltr/coat at 200 microns wft |
5 & 10 ltr set |
| ResiGard PE |
Single component polyester resin based coating |
It is used as protective coating for structural elements in warehouses, food processing areas, light industrial areas, bridges, dome structures, foundations etc. It can also be used as curing compound over green concrete. |
Clear : 7 m2 /ltr / coat at 80 microns wft (30 microns dft) Pigmented : 5 m2 /ltr/coat at 200 microns wft (120 microns dft) |
20 ltr pail |
