| Product | Description | Application / End Use | Pack Size |
| Concoat – SP3 | Concoat SP3 is a dry pre mix, fine textured finishing coat. Different textures are possible using a spray-gun or trowel.Thickness is approximately 1.5 – 2 mm. Available in various colours. | SP3 to be applied to a thickness of 1.5 – 2 mm and finished using the following techniques. 1. Float finish with a plastic trowel working over the surface in a circular, horizontal or vertical direction to achieve a semi-rough thin coat Decorative Render. 2. Use a power pattern spray gun or Tyrolean box to achieve a textured spray finish. |
50 kg bags |
| Conglaze – SP4 | Conglaze SP4 is a dry pre mix, spray textured finishing coat, available in a variety of colours. A heavy texture can be obtained using a special technique. Thickness is between 4-5 mm. | The mixed SP4 can be applied on to the prepared background using a power pattern spray gun or tyrolean box to achieve a spray finish. Conmix Technical Service Department will assist in these procedures upon request. |
50 kg bags |
| Conmix Heritage Plaster – CHP | Conmix CHP is a pre mix, pigmented, mineral based, thin coat decorative plaster for internal and external application. Various types of finishes can be achieved by using different techniques. Thickness of application is approximately 3-5 mm. | Mixed CHP is applied in a thin coat of 3-5 mm thickness, to the prepared surface. To avoid grinning, double back and fill out to an uniform thickness. Work from a wet unset edge to complete an entire unbroken panel area in one continuous operation. Level off with an aluminium straight edge. | 50 kg bags |
| Contour – SP Tyrolean | SP Tyrolean is a dry pre mix, tyrolean textured finishing coat, available in a variety of colours. It is a classical spray finish applied by spray-gun or tyrolean box. Thickness as required or as specified. | SP Tyrolean to be applied and finished using the following techniques. TYROLEAN FINISH A Tyrolean finish can be achieved by using a Tyrolean box or a spray machine i.e. spray pattern hopper gun or any other suitable machine. STUCCO FINISH The high points in the Tyrolean texture can be smoothened over with a wetted steel or plastic trowel once the plaster starts to stiffen, |
50 kg bags |
| Conwave – SP2 | Conwave SP2 is a dry pre mix, medium textured finishing coat. Special trowel application will provide a classic texture. Thickness is approximately 2-3 mm. Available in various colours. | Pre mixed SP2 is applied onto the prepared background to a thickness for approximately 2-3 mm, float finish with a plastic float, working over the surface in a circular, horizontal or vertical directions to achieve an even and textured decorative plaster. | 50 kg bags |
| Decorative Cement Plaster – DCP2 | DCP2 is a dry pre mix, ready to use pigmented decorative plaster that can be applied internally and externally. | DCP2 mixed as above can be applied in a single coat onto the prepared background up to a thickness of 18 mm and leveled by means of steel. | 50 kg bags |
| Glitterlite | Glitterlite is a dry pre mix, decorative finish for internal and external use, giving a sparkling effect due to incorporated glass, silica sand and marble chips. | Apply a thin coat of Glitterlite to an approximate thickness of 5 mm onto the prepared surface with a steel trowel. | 50 kg bags |
| Roll Easy | Roll Easy SP1 is a dry pre mix, heavy or light textured finishing coat. It is a roller application for external or internal finishes. Thickness is approximately 1-1.5 mm. Available in various colours. | The mixed SP1 is applied to the prepared background to a thickness of 1.5 mm using a plastic roller. Light, medium or heavy textured finish can be obtained by moving the roller in a vertical or horizontal direction over the applied surface. | 50 kg bags |
| Scratch Coat | Scratch Coat is a dry pre mix, pigmented decorative plaster that can be applied internally and externally. | Scratch Coat mixed as above can be applied, in a single coat, onto the prepared background to a thickness of 18 mm and levelled by means of a steel float. | 50 kg bags |
| Tradition Plaster – ERP | ERP is a pre mix, pigmented mineral based decorative plaster for internal and external application. | Mixed ERP can be applied, in a single coat, onto the prepared background to a thickness of 18 mm, levelled and finished to achieve the required design. | 50 kg bags |
