Product | Description | Application / End Use | Pack Size |
Bonding Rush Coat – BRC – MS | BRC MS is a dry pre mixed mineral based bonding rush to apply on smooth concrete walls, ceilings etc. | The mixed BRC MS should be sprayed on to the prepared background using a tyrolean box or a power pattern spray gun with a thickness of 3-4 mm. BRC MS should not be applied using a trowel. Spray over the entire prepared area and allow some time for the applied material to stiffen before doubling back. |
50 Kg bags |
Bonding Rush Coat – BRCĀ | BRC is a dry pre mix, mineral based bonding coat that is used to apply on smooth concrete walls and ceilings. | The mixed BRC should be sprayed on to the prepared background using a tyrolean box or a power pattern spray gun. BRC should not be applied using a trowel. Spray over onto the entire prepared area and allow some time for the applied BRC to stiffen before doubling back. |
50 Kg bags |
Bonding Rush CoatĀ Light – BRC LGT | BRC LGT is a dry pre mix, mineral based bonding coat specially designed as a key coat on autoclaved aerated concrete blocks / calcium silicate blocks and normal fair faced concrete prior to plastering. |
The mixed BRC LGT should be sprayed on to the prepared background using a tyrolean box or a power pattern spray gun. BRC LGT should not be applied using a trowel. Spray over onto the entire prepared area and allow some time for the applied BRC LGT to stiffen before doubling back. |
50 Kg bags |
Cement Plaster – CP14 | CP14 is a dry pre mix, cement plaster/render for internal and external use. | Mixed CP14 can be applied on to the prepared surface in one coat to a thickness of up to 20 mm and finished by felting or floating. If opted to use a plaster machine, the plaster is being applied continuously and the finishing should be done manually to its specified thickness. |
50 Kg bags |
Cement Plaster Light – CP14 LGT | CP14 LGT is a dry pre mix, cement plaster/render for internal and external use. The plaster is an ideal substrate for paint, wallpaper or decorative plasters. |
Mixed CP14 LGT can be applied with a plaster machine or by hand on the prepared surface of fair faced concrete and directly over the light weight blocks / concrete blocks in one coat at a thickness of 8-20 mm and finished by felting or floating. |
50 Kg bags |
Cement Plaster/Render CP2 | CP2 is a dry pre mix, cement plaster/render for internal and external use. This cement plaster is an ideal substrate for paint, wallpaper or decorative plasters. |
First Coat: Mixed CP2 has to be applied to the prepared background, as a spatter dash/rush coat to a thickness of 6-8 mm. A rough texture has to be obtained to provide a mechanical key for the next coat. A minimum of 48 hours have to elapse prior to the application of the second coat. Water curing is an absolute must during this period. Second/Final Coat: With the second / final coat application, a total thickness of upto 20 mm can be built up and finished by felting or floating. If opted to use a plaster machine, |
50 Kg bags |
Cement Plaster/Render Light CP2 LGT | CP2 LGT is a dry pre mix, cement plaster/render for internal and external use. It is specially designed for autoclaved aerated concrete blocks and calcium silicate blocks. |
Mixed CP2 LGT can be applied onto the prepared surface in one coat to a thickness of 8-20 mm and finished by felting or floating. If opted to use a plaster machine, |
50 Kg bags |
Concrete Rush Coat CRC | Conmix Concrete Rush Coat is a dry pre mixed mineral based bonding coat to apply directly on smooth concrete walls and ceilings. |
The mixed CRC should be sprayed on to the prepared background using a tyrolean box or a power pattern spray gun. CRC should not be applied using a trowel. Spray onto the entire prepared area and allow some time for the applied CRC to stiffen before doubling back. |
50 Kg bags |
Sand Cement Render SCR | SCR is a dry pre mix, cement lime plaster/render for internal and external use. This cement plaster is an ideal substrate for paint, wallpaper or decorative plasters. |
First Coat: Mixed SCR has to be applied to the entire prepared background as a spatter dash/rush coat to a thickness of 6-8 mm. A rough texture has to be obtained to provide mechanical key for the next coat. A minimum of 48 hours have to elapse prior to the application of the second coat. Water curing is an absolute must during this period (3-4 times daily). Second / Final Coat: With the second/final coat application, a total thickness of up to 20 mm can be built up and finished by felting or floating. |
50 Kg bags |